C Series European Mining Stone Jaw Crusher Crushing Machine

Product Description

Product Brief Introduction
The c-series European jaw crusher is honorably produced by Zhengzhou Jemelon, a well-known rock and mineral processing equipment manufacturer in the industry. It can roughly and moderately crush hard and highly abrasive ores and rocks. It has a removable frame without welding structure, an optimized cavity structure, a double wedge adjusting device, selected raw materials and components, an elastic limit vibration damping device, an integrated motor base and other special designs. It has high crushing efficiency, low investment cost, long service life and stability.

Features

• After repeated optimization, the actual feeding size of the crushing chamber is increased. With the design of large stroke and steep elbow angle, the stroke at the bottom of the crushing chamber is larger, the throughput capacity of materials is stronger, and the crushing efficiency is greatly improved.

• The rack adopts the separated design of side wall and front and rear walls. The welded rack is replaced by bolted fixation, which avoids the problem of stress concentration caused by welding and makes the structure more compact and reliable.

• Wedge adjustment replaces the pad type discharge port adjustment, which can be adjusted mechanically or hydraulically according to needs, so that the discharge port adjustment operation is simpler, time-saving and safer.

• Elastic limit blocks and rubber damping devices are used to replace the rigid foundation connection, effectively absorbing the peak load of vibration, thus reducing the mutual impact between the crusher and the foundation, reducing the fatigue damage to the foundation and improving the service life of the crusher.

• Key components such as front wall, rear wall, movable jaw body and bearing seat are made of alloy cast steel, and the main shaft is made of forging materials with higher comprehensive mechanical properties, which can withstand high impact load; International brands of bearings and couplings are selected; The large side plate, front wall plate and rear wall plate are all processed by gantry CNC milling.

• Integrated motor base, which is fixed on the crusher to save installation space; The pin hinge belt tensioning scheme makes the power transmission more stable and the adjustment more convenient.

   

Working Principle

C series European jaw crusher is mainly composed of frame body assembly, jaw plate installation assembly, moving jaw assembly, wheel assembly, adjusting device assembly, transmission tension assembly, foundation installation assembly, feed hopper (optional) and protective cover (optional). C series European jaw crushers usually use motor drive as the power source. The motor inputs power to the pulley through SPC belt, and the pulley drives the eccentric shaft to rotate to drive the moving jaw to swing up and down. When the moving jaw plate moves close to the fixed jaw plate, the volume of the crushing chamber decreases, and the materials in the crushing chamber are squeezed or chopped. When the moving jaw plate moves away from the fixed jaw plate, the volume of the crushing chamber increases, and the small pieces of crushed materials in the crushing chamber are discharged from the discharge port, so as to achieve continuous circulation operation and crushing operation.

Technical Specifications

Model	Feed Opening Size (mm)	Max. Feeding Size (mm)	Discharge Size (mm)	Capacity (t/h)	Speed (R/min)	Power (Kw)	Outside Dimensions (mm)
C80	520x800	420	60-150	80-290	350	75	2650*1540*1780
C160	700x1060	650	70-200	140-420	310	110	3230*2440*2590
C110	850x1100	720	80-200	160-550	230	160	3800*2450*2550
C125	950x1250	800	100-250	230-760	220	160	4100*2750*2780
C145	1100x1450	920	125-275	320-950	220	200	4400*3060*3210
C160	1200x1600	1020	150-300	410-1150	220	250	5700*3650*3550
C200	1500x2000	1200	175-300	610-1510	200	400	6500*3990*4260

Working Site
 
Company Certificate